Jumpking JKBKUFO-V2 Скачать руководство пользователя страница 13

Страница: 13 / 18

Part 1

Part 9

Part 10

Part 11

Part 12

Part 13

Part 2

Part 3

Part 4

Part 5 A marking

Part 6 B marking

Part 7 C marking

Part 8 D marking

Frame assembly

Step 1 - Rectangular Base

Connect Bottom straight pole (Part 5, A marking) with another bottom straight pole (Part 6, B mark-

ing) by inserting Screw D (Part 12) using Allen Key (Part 21) provided.

Repeat Step 1 for parallel tubes (Part 5, A and 6, B marking)

Next, connect bottom straight pole (Part 7, C marking) with another bottom straight pole (Part 8, D

marking) by inserting Screw D (Part 12) using Allen Key (Part 21) provided

Repeat Step 3 for parallel tubes (Part 7 C and 8 D marking)

Next, connect the tubes (Part 5 A and 6 B marking), using Allen Key, to one side of foot pad (Part 4)

and the other tube (Part 7, C and 8, D marking) to the other foot pad (Part 4), making an L shape,

using another Screw D (Part 12).

Repeat Step 5 for another L shape, and connect the two to form a rectangular base.

ASSEMBLY AND INSTALLATION INSTRUCTIONS

35mm screw (D)

Part 9

Содержание JKBKUFO-V2



















Результаты поиска

Содержание JKBKUFO-V2

Отзывы:

Похожие инструкции для JKBKUFO-V2

Бренды по названию

Популярные бренды

Jumpking JKBKUFO-V2, Руководство пользователя

Результаты поиска

Содержание JKBKUFO-V2

Отзывы:

Похожие инструкции для JKBKUFO-V2

Бренды по названию

Популярные бренды