2 pcs
1 pc
Carabiner
Spiral peg
12
ASSEMBLY INSTRUCTIONS
-
Place the UFO swing on level ground and not less than 6ft (1.8m) from any structure or obstruction such
as a fence, garage, house, overhanging branches, laundry line or electrical wires.
-
Do not install the UFO swing over concrete, asphalt, packed earth or any other hard surface; a fall onto a
hard surface can result in serious injury or death to the equipment user.
TIGHTENING NUTS & BOLTS
-
For ease of installation, do not over-tighten the nuts initially when you are starting to assemble the
equipment. This will allow for adjustments during installation.
-
After you have finished assembling the main components of the swing, go back and fully tighten all nuts.
Check the entire unit and make sure all parts are properly assembled before allowing children to use the
UFO swing.
Cover
4 pcs
Top frame cover
1 pc
Part 23
Description:
1) 78mm x 8mm Hex nut screw
2) 18.23mm dia x 8.11mm inner dia Washer
3) 12.75mm dia x 8.34mm inner dia Spring washer
4) 15.44mm dia x 6.17mm inner dia Nut
Quantity: 4 sets
Description: Screw set for Swing seat toprail (E)
1) 55mm x 8mm x 30.75mm dia Screw
2) 18.23mm dia x 8.11mm inner dia Washer
3) 12.75mm dia x 8.34mm inner dia Spring washer
4) 14.24mm dia x 7.94mm inner dia Nut
5) 11.1mm dia x 7.55mm inner dia Plastic cap
Quantity: 4 sets
