17
with a dry, soft cloth .if necessary, clean it with a soft cloth soaked in a
solution of soap and wipe dry with a clean cloth immediately .
Wipe the transducer body with soft cloth to remove any remaining
coupling gel .Clean with soap only
4.5.4 Wring any excess moisture from the cloth before cleaning.
4.5.5 Avoid pouring fluids on the device, and do not allow fluids to
penetrate the exterior surfaces of the device.
4.5.6 To prevent scratching the display, the use of a soft cloth is
recommended.
CAUTION:
To prevent damage to equipment, do not clean any
part of the product or Accessories with phenol compounds. Do
not use abrasive or flammable cleaning agents. Do not steam,
autoclave, or gas-sterilize the product or accessories.
CAUTION:
Cleaning liquids: DO not submerge the device in
liquids or pour cleaning liquids over, into or onto the device.
.
* Don’t use strong solvent, for example, acetone.
* Never use an abrasive such as steel wool or metal polish.
* Do not allow any liquid to enter the product, and do not immerse any
parts of the device into and liquids.
* Avoid pouring liquids on the device while cleaning.
* Don’t remain any cleaning solution on the surface of the device.
Wipe the surface of sensor of transducer with 70% ethanol or
alcohol, self-air dry or clean with a clean, dry cloth.
4.6 DISINFECTIONS
Cleaning the unit surface and the transducer as the above
mentioned, then wipe the surface of transducer with 70% ethanol or
alcohol, clean the transducer surface with a dry , soft cloth.
* Don’t use low temperature steam sterilization or other way to
sterilize
* Don’t use high temperature sterilizing process
