JUMO MAERA S29 SW, Руководство по установке, Страница: 59 / 118

19
5 Technical data
5 Technical data
5.1 General Information
5.2 Output
5.3 Auxiliary power
5.4 Cable
6-core, shielded cable with integrated pressure compensation hose, AWG 24 with ferrules
Reference conditions According to DIN 16086 and DIN 61298
Measuring principle Piezoresistive sensor with titanium membrane
Pressure transfer medium Synthetic oil
Admissible load changes > 10 million, 0 °% to 100 % measuring range
Mounting position Vertical/hanging from the cable
Analog output
Current
Output 405
4 to 20 mA, 2-wire
Step response
T
90
2 ms
Burden
Current
4 to 20 mA, 2-wire
R
L
≤ (U
B
-16 V) ÷ 0.022 A (Ω)
Voltage Supply U
B
a
For basic type 404393/000 DC 16 to 28 V (nominal 24 V)
For basic type 404393/062 DC 21 to 24 V (nominal 24 V)
For basic type 404393/362 DC 16 to 28 V (nominal 24 V)
For basic type 404393/662 DC 21 to 24 V (nominal 24 V)
Reverse voltage protection Yes
Max. current consumption 23 mA
Electrical circuit SELV
Requirement The device must be equipped with an electrical circuit that meets the require-
ments of EN 61010-1 with regard to „Limited-energy circuits“.
a
The voltage peaks must not exceed the specified voltage supply values!
Material
Outer sheath
FEP
Compensation hose PA
Color Black
Outer diameter Approx. 8.4 mm
Conductor cross section 0.25 mm
2
Bending radius
Moving
min. 140 mm
Fixed min. 70 mm
Tensile force 4000 N
Mass ≈ 90 g/m