JUMO MAERA S29 SW, Руководство по установке, Страница: 50 / 118

3 Identifying the device version
10
3.3 Accessories
The accessories are not checked according to DNV GL requirements.
3.3.1 Cable clamp
The wire holder, part no. 00061389, holds the probe in the liquid at a defined depth and provides strain
relief. Use of the wire holder ensures that the cable is not deformed in an unacceptable manner.
The wire holder is compatible with all JUMO level probes.
The clamping range is 5.5 to 10.5 mm. The maximum tensile strength is 2.5 kN. The case is made of
hot-dip galvanized steel sheet. The clamping jaws and guide clips are made of fiberglass-reinforced
polyamide. A stainless steel variant is also available upon request.
3.3.2 Sealing screw
For closed containers or water wells with a well head, the cable should be guided through a sealing
screw, part no. 00333329 and secured. The sealing screw is made up of a G 1 1/2" thread and is used
to route the cable.
30
39
14
G1 1/2 A