JUMO flowTRANS US W02, Краткие инструкции

Страница: 36 / 48

9 Configuration
36
Input/output 2 > digital output 2
Input/output 2 > digital output 2 > switching output
Replacement val-
ue Input range:
0.000 to 22.00 3.4 Parameter error behaviour must be config-
ured as a replacement value value.
Input range:
3.4 to 22 mA (current output)
0 to 11 V (voltage output)
Parameter Value Default setting Description
Parameter Value Default setting Description
Function Inactive, switch-
ing output, Switching output Parameter function.
Parameter
I/O Pin 2 must be configured as
a digital output value.
Parameter Value Default setting Description
Output signal Limit value
switch, batch ac-
tive, batch error,
device error Limit value switch Parameter function.
Parameter I/O Pin 2 must be configured as
a digital output value.
Parameter function of digital output 2 must
be configured as a switching output value.
Inversion On, Off Off Inverts the output signal.
Output signal
type p-switching, n-
switching, push-
pull Push-pull Parameter function.
Limit value moni-
toring function Inactive, hystere-
sis function NO
contact (NO),
Hysteresis func-
tion NC contact
(NC), window
function NO con-
tact (NO), window
function NC con-
tact (NC) Hysteresis func-
tion, NO contact Parameter function.
Inactive: Switching output function inactive.
Limit value moni-
toring function
signal Flow, tempera-
ture, pressure Flow Process value signal of the limit value mon-
itoring function
Switching point/
window high Input range: 75 Process value of the limit value monitoring
function signal.
-99999 to 99999
Release point/
window low Input range: 50 Process value of the limit value monitoring
function signal.
-99999 to 99999
Switch-on delay Input range: 0.000 Input value in s.
0.000 to 100.0
Switch-off delay Input range: 0.000 Input value in s.
0.000 to 100.0
Error behavior Inactive, active,
frozen Inactive Behavior of the output signal in case of a
malfunction
?