JUMO flowTRANS US W02, Краткие инструкции

Страница: 35 / 48

35
9 Configuration
Error behavior
Inaktiv
value: If the function parameter of digital output 1 is configured as a switching output value, a
process value error sets the switching output to inactive .
Frozen value: If the function parameter of digital output von 1 is configured as a switching output val-
ue, a process value does not have any influence on the configuration of the switching output value.
Input/output 1 > digital output 1 > pulse output
Input/output 2
Input/output 2 > analog output 2
Switch-off delay Input range: 0.000 Input value in s.
0.000 to 100.0
Error behavior Inactive, active,
frozen Inactive Behavior of the output signal in case of a
malfunction
Parameter Value Default setting Description
?
Parameter Value Default setting Description
Output signal
type p-switching, n-
switching, push-
pull Push-pull Parameter function.
Parameter
I/O Pin 1 must be configured as
a digital output .
Parameter function of digital output 1 must
be configured as a pulse output value.
Pulses per unit Input range: Output value at
nominal width Output value in pulses per volume unit (sys-
tem unit of the
volume parameter).
1 to 100000
Parameter Value Default setting Description
I/O Pin 2 Analog, digital
output, digital in-
put Digital output Parameter function.
Parameter Value Default setting Description
Function Inactive, current
output, voltage
output Current output Parameter function.
Parameter
I/O Pin 2 must be configured as
an analog output value.
Output signal Flow, tempera-
ture, pressure Flow Parameter output signal.
Scaling start Input range: 0.000 Process value for the current output (4 mA)
or the voltage output (0 V).
-99999 to 99999
Scaling end Input range:
Max
device mea-
suring range
Process value for the current output (20 mA)
or the voltage output (10 V).
-99999 to 99999
Error behavior Low, high, frozen,
substitute value Low Output signal in the event of a malfunction
Low: 3.4 mA or 0 V
High: 22 mA or 11 V
Frozen: Last valid value
Replacement value: Input value for the pa-
rameter
replacement value