JUMO AQUIS 500 CR, Руководство по эксплуатации

Страница: 36 / 100

6 Operation
36
6.8 Operator level
All the parameters that have been enabled by the administrator (Administrator
level, see “Administrator level”, page 36) can be edited in this level. All other
parameters (marked by a key
) can only be read.
✱
Press the key for at least 3 seconds.
✱
Select OPERATOR LEVEL.
For operator level parameters and their explanations, see Chapter 11.1
“Operator level parameters”, page 75 ff.
6.9 Administrator level
- All parameters can be edited (altered) in this level.
- In this level, you can also define which parameters are allowed to be edited
(altered) by a “normal” user, and/or which calibration actions are permitted.
Editable parameters can be edited in the operator level.
Non-editable parameters are marked in the operator level by a key symbol
.
You can access the administrator level as follows:
✱
Press the key for longer than 3 seconds.
✱
Use the or key to select ADMINISTRATOR LEVEL.
✱
Use or to enter the password 300.
✱
Press the key.
PGM
PGM
PGM