JUMO 705003, Руководство по эксплуатации, Страница: 82 / 112

5 Configuration
82
5.10 Programs
Each program (each program plan) can consist of a maximum of 200 program sections. Up to 30 setpoint
values and up to 32 operating contacts can be used in each program section.
Tolerance band monitoring can be set up for the first setpoint value. This means that the relevant actual
value is monitored; if it leaves the tolerance band, the program is stopped until it returns to a value that
is within the tolerance band (depending on configuration).
A total of up to 300 programs can be managed in a program pool.
A program generator is required to execute a program. A program can also be assigned multiple pro-
gram generators.
The following description applies to program plans 001 to 300.
Program header
Parameter Selection/data input Description
Program GUID Enter ID
(
0 )
ID for uniquely identifying the program (length: 64
bits)
Program name Enter text (or use existing text) Designation of the program
Program informa-
tion Enter text (or use existing text) Description of the program
Pictogram name Select pictogram Pictogram (icon) for graphical identification mark-
ing of the program
Favorite Programs marked as favorites are placed at the
start of the program start menu. If there is more
than one favorite, the program number is the deci-
sive criterion (in ascending order).
No Program is not a favorite
Yes Program is a favorite
Repetitions Cyclic program repetition
Inactive The program is not repeated (only one program
run).
Endless The program is repeated endlessly.
Number The program is repeated as many times as is
specified by the parameter "Number of repeti-
tions".
Program assign-
ment (allocation) -9223372036854775808 to
9223372036854775807
(
0 )
Number (length: 64 bits) for assigning a program to
a plant or a group.
This number can be used in the customer-specific
application to group similar programs.
Number of repeti-
tions 0 to 99999 Number of program repetitions
Assignment (allo-
cation) Selection of program generators to be used to ex-
ecute the program.
Off (FALSE) Program generator not selected
On (TRUE) Program generator selected