JUMO 705003, Руководство по эксплуатации, Страница: 79 / 112

79
5 Configuration
Tolerance band monitoring
Setting of setpoint values: setpoint specification
Setting of setpoint values: setpoint limits
Parameter Selection/data input Description
Alarm type Inactive The tolerance band monitoring is not active.
Event The tolerance band violation is entered as an
event in the event list.
Alarm The tolerance band violation is entered as an
alarm in the event list and the alarm list.
Alarm at level High Alarm at high level (1 = actual value outside the tol-
erance band)
Low Alarm at low level (0 = actual value within the tol-
erance band)
Event text Enter text (or use existing text) This text is entered in the relevant list in the event
of a violation of the tolerance band.
Hold when toler-
ance band is ex-
ceeded If the tolerance band is violated, the program can
be stopped until the condition is over.
Yes The program is stopped.
No The program is not stopped.
Parameter Selection/data input Description
Setpoint value 01
to Setpoint value
30 Specification of whether a change made to the set-
point value should take the form of a step or a
ramp.
Setpoint step Setpoint value change as step
Setpoint ramp Setpoint value change as ramp
End value for setp. ramp 1 to
End value for setp. ramp 10 The relevant setpoint value acts as the end value
for the ramp function of the setpoint value (1 to 10)
which is selected here.
If there is no end value specified in a program sec-
tion, then the program generator works in accor-
dance with its configuration (setpoint step or
setpoint ramp).
Parameter Selection/data input Description
Decimal places Auto The number of decimal places is selected auto-
matically.
XXXXXp No decimal place
XXXXpX One decimal place
XXXpXX Two decimal places
XXpXXX Three decimal places
XpXXXX Four decimal places
Lower tolerance band limit (tol. band lower limit)
Minimum -99999 to 99999 Admissible minimum value for the lower tolerance
band limit
Maximum -99999 to 99999 Admissible maximum value for the lower tolerance
band limit