*Make sure that the concave holes on both
* L connector for left side
* R connector for right side
1. * Fix the L connector to the inside of frame A with a screw.
the frame B.
3. Press one side corner into the frame and then others,
R
panels by hand into horizontal tubes.
the right side of frame B with a flat screw.
* Fix the R connector to the left side and M connector to
* M connectors for extention only
screw
Socket cap
B
then rotate it by 90 degrees by hand.
2. Attach the horizontal tube to the connector and
screw
tube 750 mm are facing inward.
*Make sure that screw holes of horizontal
sides of the horizontal tube are facing up.
A
stopper x16
Vertical frame x2
R connector x8
L connector x8
M4 Hex screwdriver X1
Socket cap screw X16
Assembly Instructions
Rubber
750 mm Horizontal tube x8
375 mm Steel
panel x7
panel x6
750 mm Steel
4. Insert rubber stoppers for 750 mm floor
pat the panel corner in one by one.
* Fix the R connector to the inside of frame D with a screw.
* Fix the connectors to the frame C in the same order as
Socket cap
L
Causion:
Causion:
Model No.: SF-3175
