Preparations
14
5. Preparations
5.1. Installation
Notice:
Plexiglas and Makrolon baths are not resistent to solvents.
Avoid contamination of the bath fluid with solvents.
Top view
A
•
Place the circulator in an upright position.
ED-5A / ED-5M
•
The circulator (A) mounted on a stainless steel bridge is
placed on the back of the bath tank.
A
B
ED-5
•
The circulator (A) mounted on a stainless steel bridge is
placed on the back of bath tank.
Close the bath tank with the bath cover (B).
5.2.
Bath fluids
Caution:
No liability for use of other bath fluids!
Do not use flammable bath fluids!
Water: The quality of water depends on local conditions.
•
Due to the high concentration of lime, hard water is not suitable for
temperature control because it leads to calcification in the bath.
•
Ferrous water can cause corrosion - even on stainless steel.
•
Chloric water can cause pitting corrosion.
•
Distilled and deionized water is unsuitable. Their special properties cause
corrosion in the bath, even in stainless steel.
Recommended bath fluids:
Bath fluid
Temperature range
soft/decalcified water
5 °C to 80 °C
