Julabo Corio C, Оригинальное руководство по эксплуатации

Страница: 29 / 36

Maintenance
29
 The device is switched off and disconnected from the mains voltage.
1. Allow the device to cool down to room temperature.
2. Completely drain the bath fluid.
3. Clean the surface of the circulator and the bath tank with a damp cloth.
 Some dish detergent may also be used for cleaning. If in doubt, ask
technical service for alternative cleaning mediums.

The device has now been cleaned.
9.6 Device storage
This section describes how to store the device.
 The device is switched off and disconnected from the mains voltage.
1. Empty all system components completely.
2. Clean the device.
3. Carefully dry the device and all its system components, e.g. with
compressed air.
4. Close all connections.
5. Store the device in a dust-free, dry and frost-free location.

The device is protected and can be safely stored there. It can be put into
operation again as needed.
9.7 Technical Service
If the unit shows faults you cannot resolve, please contact our Technical Service.
JULABO Technical Service
Tel.: +1(610) 231-0250 Option 3
Fax: +1(610) 231-260
Email: Service@julabo.us
Before sending a device to Technical Service, the following points must be
observed:
• Clean and decontaminate the device properly to avoid endangering service
personnel.
• Include a brief description of the fault.
• Package the device safely for shipment.