Safety notes for the user
16
•
Prevent water from entering the hot bath oil.
•
Do not drain the bath fluid while it is hot!
Check the temperature of the bath fluid prior to draining (e.g., by switching the
unit on for a short moment).
•
Use suitable connecting tubing.
•
Avoid sharp bends in the tubing, and maintain a sufficient distance from
surrounding walls.
•
Make sure that the tubing is securely attached.
•
Regularly check the tubing for material defects (e.g., for cracks).
•
Never operate damaged or leaking units.
•
Always turn off the unit and disconnect the mains cable from the power source
before performing any service or maintenance procedures, or before moving the
unit.
•
Always turn off the unit and disconnect the mains cable from the power source
before cleaning the unit.
•
Always empty the bath before moving the unit.
•
Transport the unit with care.
•
Sudden jolts or drops may cause damage in the interior of the unit.
•
Observe all warning labels.
•
Never remove warning labels.
•
Never operate units with damaged mains power cables.
•
Repairs are to be carried out only by qualified service personnel.
•
Some parts of the bath tank and the pump connections may become extremely
hot during continuous operation. Therefore, exercise particular caution when
touching these parts.
•
Some parts of the bath tank and the pump connections may become extremely
cold during continuous operation. Therefore, exercise particular caution when
touching these parts.
Caution:
The circulator may be used, for example, to control the temperature of fluids in a
reactor.
We do not know what substances are contained in these vessels.
Many substances are:
•
inflammable, easily ignited, or explosive
•
hazardous to health
•
environmentally hazardous
i.e.:
dangerous
The user alone is responsible for the handling of these substances!