EN
35
sharp cutting edges are less likely to jam
and are easier to control.
• Use the power tool, accessories and bits
etc., in accordance with these instructions,
taking into account the actual working
conditions and the work that is to be
done. It can be dangerous to use power
tools for purposes other than those they
are intended to be used for.
USING AND MAINTAINING
BATTERY-POWERED TOOLS
• Only charge the battery with the charger
recommended by the manufacturer.
Charging other batteries can result in a
risk of personal injury and/or fire.
• Only use batteries recommended by the
manufacturer. The use of other batteries
can result in a risk of personal injury and/
or fire.
• When the battery is not in use keep it
away from metal objects such as
paperclips, coins, keys, nails, screws and
other small metal objects that can short
circuit the terminals. Short circuiting
discharges large amounts of energy that
can cause a fire and/or burn injuries.
• Failure to handle the battery carefully
can cause fluid to leak from the battery.
Avoid contact with battery fluid.
On contact with battery fluid, rinse
immediately with plenty of fresh water.
Seek medical attention if you get battery
fluid in your eyes. Battery fluid can cause
skin irritation and/or burns.
• Do not use damaged or modified
batteries, or power tools that are
damaged. Damaged or modified batteries
can behave unexpectedly and cause a fire,
explosion or risk of personal injury.
• Do not expose batteries or power tools to
naked flames or heat. Batteries can
explode when exposed to naked flames or
temperatures higher than 130°C.
• Follow the instructions for charging and
charge the battery only at the
• Wear suitable clothing. Do not wear
loose-fitting clothing or jewellery.
Keep your hair, clothing and gloves away
from moving parts. Loose-fitting clothing,
jewellery and long hair can get caught in
moving parts.
• If dust extraction and dust collection
equipment is available, this should be
connected and used correctly. The use
of such devices can reduce the risk of
dust-related problems.
USING AND LOOKING AFTER
POWER TOOLS
• Do not force the power tool. Use the
correct power tool for the planned work.
The tool does the job better and more
safely when used at the rate for which it
was designed.
• Do not use the power tool if it cannot
be switched on and off with the power
switch. Power tools that cannot be
controlled with the power switch are
dangerous and must be repaired.
• Pull out the plug and/or remove the battery
before making any adjustments, changing
accessories or putting the power tool away.
These safety precautions reduce the risk of
accidentally starting the power tool.
• Store power tools out of the reach of
children when not in use. Never allow
children, or anyone who is unfamiliar with
the power tool and these instructions, to
use the tool. Power tools are dangerous if
used by inexperienced persons.
• Maintain power tools and accessories.
Check that moving parts are properly
adjusted and do not jam, and that no
parts are incorrectly fitted or damaged.
Check for other factors that could affect
functionality. If a power tool is damaged it
must be repaired before it is used again.
Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
Содержание Meec tools 012586
Страница 4: ...1 1 2 3 4 5 6 7...
