Jula Meec tools 005876, Руководство по эксплуатации

Страница: 31 / 33

EN
31
Vibration level 2.5 m/s², K = 1.5 m/s²
Always wear ear protection.
The declared vibration value and noise, which
have been measured by a standardised test
method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 836, EN ISO 3744.
WARNING!
The actual vibration and noise level when
using power tools may differ from the
specified maximum value, depending on
how the tool is used and the material. It
is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
1. Top handle
2. Strain reliever
3. Power cord
4. Top tube
5. Bottom tube
6. Motor casing
7. Scraper blade
8. Snow screw
9. Locking screw
10. Adjusting screw, bottom handle
11. Bottom handle
12. Power switch
13. Start inhibitor
FIG. 1
ASSEMBLY
ASSEMBLY OF TOP AND BOTTOM
TUBE
Put the movable handle over the middle part
before fitting the top and bottom tube.
FIG. 2
NOTE:
It is not possible to fit the adjustable handle
after the tubes are fitted together.
ADJUSTABLE HANDLE
1. Fit the bottom tube in the top tube and
align the screw holes to each other.
FIG. 3
2. Put the locking screw through the holes
in the top and bottom tube and lock with
the nut.
FIG. 4
FIG. 5
IMPORTANT:
To put in the locking screw, carefully move
the wires away inside the tube with a round
object. Do not use sharp or pointed objects
that can damage the wires.
ADJUST THE HANDLE
1. Adjust the handle to a convenient working
position.
2. Tighten the adjuster screw.
FIG. 6
USE
INTENDED USE
The electric snow shovel is intended to remove
snow from paths and other similar places
outdoors. The snow shovel is not intended for
commercial use.