Jula 802-337, Руководство по установке, Страница: 45 / 49

ENGLISH
45
Before use
IMPORTANT!
Always check if the surface or material can withstand the steam cleaner by testing on a small and
concealed surface.

Steam can fade painted or varnished wood surfaces.

Steam can discolour shiny plastic surfaces.

Acrylic, velvet and linen are heat-sensitive materials that rarely withstand steam cleaning.

Do not use the steam cleaner on acrylic material without having first tested on a concealed area.
The manufacturer is not liable for any damage to objects, materials or plants or injury to people or
animals resulting from the improper use of hot steam or misuse of the appliance.
Never use any additives (such as perfumes, dry cleaning fluid or alcohol products) in the water. This
could damage the appliance or pose a risk of injury or damage to property. We recommend the use of
distilled water to prevent lime deposits, especially if the water is very hard (above 21°dH). Otherwise you
can use boiled water to extend the life of the appliance.
IMPORTANT!
Never fill with more than 1.4 litres of water.
Replace the filler cap by pressing it and turning it clockwise.
TIPS!
The time for heating is reduced if you fill the tank with warm water.
Mains supply
Connect the power cord to a suitable power outlet
that is properly installed and earthed in accordance
with regulations in force.
Press the power switch to turn on the appliance.
The green indicator light for operation and red for
heating (fig. 20) come on. The operation indicator
light is always lit when the appliance is switched
on. The indicator light for heating is lit when
heating is in progress. It takes about 11 minutes
for the appliance to reach operating temperature.
The red indicator light for heating goes out and the
appliance is ready for use.
1. Operating pilot lamp
2. Heating pilot lamp