13
When the Auto-lifter (AK121) is used :
17) Insert white connector 2P cord
@5
coming from
the machine head inside the electrical box through
front cover through hole B, pass it through cord
clamps “e”, “f” and “j”, and insert it into connector
CN40
@6
.
When the bird’s nest prevention device is used
(CB type)
18) Insert white small connector 6P cord
@7
coming
from the machine head inside the electrical box
through front cover through hole B, pass it through
cord clamps “e” and “j”, and insert it into connector
CN52
@8
.
When foot pedal for standing work (PK70 or 71) is used :
19) Insert black connector 12P cord
@9
inside the
electrical box through front cover through hole B
coming from the foot pedal for standing work, pass
it through cord clamps “a” and “c”, and insert it
into connector CN32
#0
.
20) Connect white connector 2P of cord
#1
supplied
as accessories to which red connector 2P and
white connector 2P are attached to white
connector 2P
#28
of under cover of the machine
head.
Fix omega lock
#3
supplied as accessories with
the neighboring cords and cord
#1
as shown in
the figure.
21) Insert red connector 2P side of cord
#1
supplied
as accessories to which red connector 2P and
white connector 2P are attached inside the
electrical box through front cover through hole, and
insert it into red connector CN25
#4
.
Change the setting of function setting No. 23
from “0” to “1” after completing all set-up
procedure. For the details, see p.107 and p.110.
#2
#1
#3
#4
#1
@5
@6
f
e
j
@8
@7
#0
@9
j
e
a
c
