8
1
2
5
4
3
6
7
1
2
3
3
3
4-5. Installing the electrical box
Install the electrical box on the underside of the table
at the location illustrated using round-head bolt
1
, plain
washer
2
, spring washer
3
and nut
4
supplied with
the machine, and using bolt having hexagonal
indentation on the head
5
, plain washer
6
and spring
washer
7
supplied with the machine.
4-7. Installing the operation panel (IP-100 (D))
1) Install operation panel
1
on the machine head using
screws
3
which have been assembled to panel
installing bracket
2
.
4-6. Connecting the power switch cord (Japan and general export area)
Do not disassemble the operation
panel to prevent it from breakage.
Cau tion
Clamp the cord coming from the
panel and that of the machine head
with the clip band supplied as
accessories.
Cau tion
1
6
9
B
7
8
3
4
5
A
2
1) Loosen screw
1
located on the side of the power
switch supplied as accessories and remove the
power switch cover.
2) Connecting the input power cord of electrical box
¡
When the input power cord of electrical box is 4P
Put 4P cord from hole A of the power switch and
securely fix green/yellow cord to
5
, white cord to
2
, black cord to
3
and red cord to
4
with screws.
¡
When the input power cord of electrical box is 3P
Put 3P cord from hole A of the power switch and
securely fix green/yellow cord to
5
, brown cord to
2
and sky blue cord to
3
with screws.
3) Connecting the power cable supplied as accessories
¡
In case of 3-phase power cable
Put power cable from hole B of the power switch,
and securely fix green/yellow cord to
9
, white cord
to
6
, black cord to
7
and red cord to
8
with screws.
¡
In case of single phase power cable
Put power cable from hole B of the power switch,
and securely fix green/yellow cord to
9
and other
cords to
6
and
7
with screws.
8
is not used.
4) Installing the power switch cover
Securely tighten screw
1
located on the side of
the power switch.
