JUKI KE-750, Руководство по установке

Страница: 30 / 59

-
27
-
Adding the trolley spacer (E2738721000) (For height adjustment)
Adjust the height of the replacement table with the trolley spacer as shown in Figure 11.4 if an
inconvenience occurs due to a slanting floor or a low replacement table.
1. Loosen the fixing screws.
2. Insert the M6 screw into the height adjustment tap, then turn the M6 screw until the
space between the caster plate and the trolley is made.
3. Insert the required pieces of the trolley spacer into the space.
4. Remove the adjustment screw, then tighten the fixing screw.
When the caster plate is fixed at the upper
position, insert the trolley spacer into the
space between the trolley and the fixing
screw, and then fix them as shown in
Figure 11.5.
Trolley spacer
E2738721000
Caster plate
Trolley
Fixing screw
Height adjustment tap (M6)
Figure 11.4
Figure 11.5
CAUTION !
Caster plate
Trolley
Trolley spacer
Fixing screw