– 35 –
3
Move the needle position.
Press MOVE key
G
n the coordnate nput screen,
and the needle position moves in the specified direction.
4
Input the coordinate.
When the needle position has move to the specified position,
press DECIDING POINT button
H
, and the poston s
nputted as the shape pont (passng pont).
It s possble to nput by repeatng the steps of
3
and
4
as
well.
5
End setting of the linear offset sewing.
When ENTER button
I
s pressed, the set data s
nputted, and the screen returns to the standard screen.
DECIDING POINT button of the last pont can be omtted.
Settng procedure of the offset sewng of other shapes s the
same as that of the lnear offset sewng.
Inputtng procedure of the coordnate of the respectve sewngs
s the same as that of the ordnary sewng.
1. Start the shape as shown in the left-hand
figure from the position of
1
, and input in the
order of
2
→
3
→
4
→
1
. Then the pattern
as shown in the broken line is created.
When starting not the corner of polygon as
1
but starting from the side as
1
’, a neat offset
sewing can be created.
2. Input a shape that one line is formed from the
start point to the end point of input.
3. In case of arc or circle, when the width is
made larger than the radius of circle, the
pattern which is against expectation is
created. So, be careful.
2
3
1
4
1
'
H
G
I
Содержание IP-410
Страница 1: ...IP 410 INPUT INSTRUCTION MANUAL ENGLISH...
