– 26 –
(3) Spline ordinary sewing (024)
It s possble to smply nput the smooth curve usng the splne ordnary sewng.
1
Display the spline ordinary sewing setting screen.
When selectng and executng SPLINE ORDINARY SEWING
(functon code 024)
n the code lst screen, the splne
ordnary sewng settng screen s dsplayed.
2
Set the spline ordinary sewing.
The set value of present stitch length is displayed at STITCH
LENGTH INPUT button
A
, and the set value of
present sewng speed s dsplayed at SEWING SPEED INPUT
button
B
n the splne ordnary settng screen.
When the button of the tem you desre to change the settng s
pressed, the nput screen of the set value s dsplayed. Settng
procedure of sttch length and sewng speed s the same as
that of the lnear ordnary sewng.
After settng or when t s not necessary to change, press
ENTER button
C
, and the coordnate nput screen s
dsplayed.
3
Move the needle position.
Press MOVE key
D
n the coordnate nput screen,
and the needle position moves in the specified direction.
4
Input the coordinate.
When the needle position has moved to the specified position,
press PASSING POINT button
E
, and the poston s
nputted as the shape pont (passng pont).
Or, press DECIDING POINT button
F
, and the poston
s nputted as the breakpont.
For the breakpont, refer to
5
End the setting of spline ordinary sewing.
When ENTER button
G
s pressed, the set date s
nputted, and the screen returns to the standard screen.
DECIDING POINT button of the last pont can be omtted.
It s possble to nput by repeatng the operaton of steps
3
and
4
as well.
C
B
A
F
E
D
G
Содержание IP-410
Страница 1: ...IP 410 INPUT INSTRUCTION MANUAL ENGLISH...
