JUKI IP-310/ACF-172-1790, Инструкция по эксплуатации

Страница: 33 / 142

− 32 −
Button and display Description
A LBH PATTERN NEW REGISTER
button
LBH pattern No. new register screen is displayed.
→
Refer to 2-5. Performing new register of LBH pattern,p.41 .
B LBH PATTERN COPY button LBH sewing data copy screen is displayed.
→ Refer to 2-11. Copying LBH sewing pattern,p.61 .
C LBH PATTERN DATA
AUTOMATIC TURN button (to
return)
LBH pattern data used in the ACF pattern data being selected at present is
automatically turned.
D ACF PATTERN No. AND
SEWING ORDER display
ACF pattern No. being selected and sewing order are displayed. LBH
pattern Nos. which are set in the displayed sewing order are in the state of
selection.
E LBH PATTERN DATA
AUTOMATIC TURN button (to
advance)
LBH pattern data used in the ACF pattern data being selected at present is
automatically turned.
F PRESSER DOWN button Presser down screen is displayed and the needle moves to the right side. To
raise the presser, press the presser up button displayd in the presser down
screen.
＊
When performing threading in this state, turn OFF the power before
performing.
G BOBBIN WINDING button Bobbin thread can be wound.
→
Refer to 1-6. Winding bobbin thread,p.17 .
H LBH PATTERN SELECION
button
LBH pattern No. being selected at present is displayed on the button, and
when the button is pressed, the LBH pattern No. change screen is displayed.
→ Refer to 2-2. Performing LBH pattern No. selection,p.36 .
Ⅰ NEEDLE THREAD TENSION
SETTING button
Needle thread tension value which is set to LBH pattern data being selected
at present is displayed on the button, and when the button is pressed, the
needle thread tension change screen is displayed.
→ Refer to 2-9. Changing needle thread tension,p.58 .
J OVEREDGING WIDTH, LEFT
SETTING button
Overedging width, left which is set to LBH pattern data being selected at
present is displayed on the button, and when the button is pressed, the
overedging width, left change screen is displayed.
K KNIFE GROOVE WIDTH, LEFT
SETTING button
Knife groove width, left which is set to LBH pattern data being selected at
present is displayed on the button, and when the button is pressed, the knife
groove width, left change screen is displayed.