JUKI IP-310/ACF-172-1790, Инструкция по эксплуатации

Страница: 72 / 142

− 71 −
2-15. Performing LBH continuous stitching
Change the sewing mode to the continuous stitching mode before performing setting.
→
Refer to 2-13. Changing sewing mode,p.65 .
2-15-1. Selection of LBH continuous stitching data
1
Display the LBH continuous stitching data
input screen.
Only in case of the LBH continuous stitching data
input screen (light blue), it is possible to select
LBH continuous stitching data No. In case of the
sewing screen (green), press READY key
and display the LBH continuous stitching data
input screen (light blue).
2
Call the LBH continuous stitching data No.
selection screen.
When LBH CONTINUOUS STITCHING DATA NO.
SELECTION button (A) is pressed, the LBH
continuous stitching data No. selection screen is
displayed. LBH continuous stitching data No. selected
at present and the contents are displayed in the upper
part of the screen, and other LBH continuous stitching
data No. buttons which have been registered are
displayed in the lower part of the screen.
3
Select the LBH continuous stitching data No.
When UP or DOWN SCROLL button
(B) is pressed, the registered LBH continuous
stitching data No. buttons changes over in order.
Contents registered to the LBH continuous
stitching data are displayed in the buttons. Here,
press the LBH continuous stitching data button (C)
you desire to select.
4
Determine the LBH continuous stitching data No.
When ENTER button (D) is pressed, the LBH
continuous stitching data No. selection screen is
closed and the selection has been finished.
A
C
D
B