JUKI DLU-5494N-7/IP-110C, Руководство по установке, Страница: 5 / 10

­–­3­– ­–­3­– ­–­3­–
There­are­cases­where­the­software­in­the­state­of­delivery­may­be­unadaptable.­Perform­checking­and­
updating­of­the­software­following­the­procedure­below.­
Turn­ON­the­power,­and­press­switch­
1
­for­three­seconds.
■ Normal screen
The­screen­is­changed­over­to­the­screen­below.­Then­press­switch­
2
­to­open­the­RVL­check­screen.
■ Information maintenance level screen
■ RVL check screen
When­the­version­of­ ­is­not­displayed,­there­is­a­possibility­that­either­of­the­software­may­be­unadaptable.
Check­the­versions­of­the­aforementioned­software.
3. SETUP OF THE SOFTWARE
(1) Checking procedure of the software version
1
<Information switch>
Be sure to start from the software of IP-110 when performing the version-up of the software.
:
Version­of­IP-0­software
:
Version­of­KT-0(EPF)­p.c.b.­software
: Version­of­main­shaft­software
2