– 63 –
(5) observing the working measurement information
1
Display the information screen.
When nformaton key
A
of the swtch seat secton s
pressed n the data nput screen, the nformaton screen s
dsplayed.
2
Display the working measurement screen.
Press workng measurement screen dsplay button
B
n
the nformaton screen. The workng measurement screen s
dsplayed.
Informaton on the followng 5 tems are dsplayed n the workng
measurement screen.
A
: The nformaton s automatcally dsplayed from the tme of
start of measurng the workng rato.
B
: The nformaton s automatcally dsplayed from the tme of
start of measurng the machne speed.
C
: The nformaton s automatcally dsplayed from the tme of
start of measurng the ptch tme.
D
: The nformaton s automatcally dsplayed from the tme of
start of measurng the machne tme.
E
: Enter the number of tmes of thread trmmng referrng to
the followng tem
3
.
3
Input the number of times of thread trimming.
Next, nput the number of tmes of thread trmmng per proc-
ess. When NUMBER OF TIMES OF THREAD TRIMMING
button
E
s pressed, the number of tmes of thread
trmmng nput screen s dsplayed.
Input the value you desre wth ten keys or UP/DOWN buttons.
After the nput, press ENTER button
C
.
* When the input value is 0, count of the number of times
of thread trimming is not performed. use this function by
connecting the external switch.
B
B
D
E
A
C
C
A
