ATF Instruction Manual
4
2. How to Use
2.1 Attaching or Detaching the Tape Reel
2.1.1 How to attach the tape reel
1) Push the upper cover hook in the
direction indicated with the arrow mark to
unhook the upper cover.
Upper cover hook
Figure 2.1.1
2) Lift the upper cover in the direction
indicated with the arrow mark to make
preparations for setting a tape.
Figure 2.1.2
Upper cover
3) Hold down the reel brake in the direction indicated with the arrow mark (see
Figure 2.1.3), set a tape into the reel support shaft, and store it into the reel
support.
Reel support
Outer flange section of the tape reel
Reel brake
Figure
2.1.3
Figure
2.1.4 Figure
2.1.5
CAUTION
Check to see if the outer flange section of the tape reel is in contact with
the reel brake when you attach the reel brake (see fig. 2.1.4, 2.1.5).
If the reel brake is not attached correctly, the tape feeder cannot function
normally.
