Judo JSMP-U 1, Инструкция по установке и эксплуатации

Страница: 12 / 20

Installation and operating instructions: JUDO potential-free fault indicator JSMP-U 1-7
All rights reserved. JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380

D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0

Fax +49 (0)7195-692-188
Revision level: 13.12.2016
E-Mail: info@judo.eu

Internet: www.judo.eu
12
4.3.1 Fault indication kit for camshaft (JSMP-U 3-6)
Fig. 2: Fault indication kit (microswitch) camshaft Fig. 3: Fault indication kit (microswitch) camshaft (from above)

Fit the angle bracket with microswitch to the right alongside the camshaft, so that the third cam
activates the microswitch.
4.3.2 Fault indication kit for front (JSMP-U 5)
To install the microswitch at the front of the camshaft, the reserve cylinder of the water
softening system must be in the standby position!
Fig. 4: Fault indication kit Front

Screw the cam top part in the front of both camshafts.

Insert the microswitches in the bracket and tighten.
3. Cam
Bracket Cam top part