Judo i-soft, Инструкция по установке и эксплуатации

Страница: 10 / 32

10 JUDO i-soft
Installation
The flange surface of the built-in rotary
flange must be in a vertical position! The
built-in rotary flange must be fitted so that
mechanical stresses cannot occur! Other-
wise mechanical damage can result in the
built-in rotary flange. This can result in major
water damage.
Therefore, during installation, ensure that no
large forces act on the pipe, built-in rotary
flange and softener.
4.1.5 Mounting the wall support components
The wall support provides the device with safe support and prevents the device from
becoming entangled in tubing. When mounting the wall support (order no. 2201227), please
refer to the corresponding assembly instructions.
The console set (order no. 2201231) mainly serves to secure the unit, and ease the burden
on the tubing.
Fig. 4: Built-in rotary flange
Fig. 5: Wall support components
wall support
console set