Judo 8200367, Инструкция по установке и эксплуатации

Страница: 23 / 32

Fault
JUDO QUICKSOFT MEGA 4 23
5.15 Overview of the display
messages
6 Fault
Opening of devices and replacement of parts subject to water pressure must only be
performed by licensed persons to ensure device safety and leak-tightness.
Deleting the fault indication:
– Press <OK> key.
or
– Disconnect the power supply unit from
the socket and plug back in after about
5 seconds.
7 Servicing
7.1 Cleaning
Only use clear drinking water to clean the
housing.
Standard all purpose cleaners and glass
cleaners can contain up to 25 % solvent or
alcohol (methylated spirits).
These substances can chemically attack the
plastic parts resulting in embrittlement and
even breakage.
Therefore do not use these types of
cleaner!
Display Description Further info
Regeneration Message is displayed during regen-
eration of the resin container.
see chapter 5.6.3 “Re-
generation”
Maintenance/
Service req.
Message appears after the one-year
maintenance interval has elapsed.
see chapter 8.3.1
“Message “Mainte-
nance/Service””
Attention!
Salt deficit
Message appears after exceeding of
the minimum chlorine flow.
see chapter 5.7.1 “Mes-
sage upon low salt lev-
el”
Indication on the display Cause Remedy
Attention! Error
Reg. Drive
Regeneration drive
defective.
Notify customer service! Unplug the pow-
er supply unit! If fitted, switch the bypass
valve to bypass!
Attention! Error
Salification
Salting process de-
fective, container
overfilled or leak.
Check the brine level in the salt reservoir!
Reset fault indication! If the fault occurs
again, notify customer service!
Attention! Error
Lso-electrode
Level electrode
defective.
Reset fault indication! If the fault occurs
again, notify customer service!
Attention! Error
Keypad
Keypad defective. Reset fault indication! If the fault occurs
again, notify customer service!
When communicating with customer
service, please always have the de-
vice number and order number avail-
able (see fig. 9).