www.modellmarkt24.ch
The control horns will be placed and glued into the slots of
the appropriate control surfaces. Make sure when applying
the control horns that they are flush and that the hole for the
linkage is directly above the hinge line. It may be a good idea
to scuff the sides of them with sandpaper. Shown above is
one of the aileron control horns.
The elevator control horn is the shortest and will be placed
as shown above. You will notice a small square shaped
cutout on the underside. This is meant to be placed around
the spar of the elevator that was installed earlier.
www.modellmarkt24.ch