FPO
ATTACHING YOUR MITER SAW OR OTHER BENCH TOP POWER TOOL
Various bench top tools can be used with your REDLEG™ 60” Miter Saw Workstation by attaching
them to the Rapid Tool Clamp Mounts. Always position the saw to achieve maximum balance and
stability. All four corners of the saw must be bolted to the Tool Mounts before use. Make sure bolts
DO NOT extend above the table of the miter saw.
1. Lock the saw arm in the down position, ensuring that your power tool is NOT plugged in.
2. Place the saw on top of the Rapid Clamp Tool Mount (Part #2), aligning the mouting holes on the miter saw
base with the slot on the top of the Tool Mount.
3. Feed an M8*55 Carriage Bolt (Part #8) up through the Tool Mount slot and a mounting hole in the saw.
Secure in place using a #8 Washer (Part #12), Spring Washer (Part #13), and an M8 Nut (Part #10).
Repeat for the other end of the Tool Mount.
4. Place the other side of the saw on top of the second Rapid Clamp Tool Mount, aligning the mounting holes
on the miter saw base with the slot on the Tool Mount.
5. Repeat Steps 2-4.
8