JRI Spy RF T, Руководство пользователя

Страница: 5 / 10

©JRI 5
IV.
USE
a) Stop
When you receive it, your SPY RF is stopped. Only the time clock is active. It can neither emit nor receive anything.
b) Start
To start your SPY RF, please press between 5 and 10” on the
button:
- the 2 LEDs are on and flash at the same time
- all the display segments are also on
- SPY RF is now in waiting mode
Remark: If you press >10’’ => no effect => remains off
c) Waiting mode
The SPY RF is ready to receive a configuration or to start a new recording session.
The symbol “ Halt ” is on: no measures in progress.
Use the pushbutton to start.
d) Configuration
SPY RF configuration is done from the Sirius software and then
transferred into your SPY RF by radio frequency.
e) Measurement start
The SPY RF has 2 starting mode:

automatic start
 manual start
f) Automatic start
Your SPY RF starts recording:

automatically when the configuration is transferred,

It displays the temperature in °C degrees, channel number, measurement unit and memory status.
The green LED flashes every minute.
+
Working LED (green):
2’’ => starting measurements
then flashes every 1 minute