JRI Spy RF T, Руководство пользователя

Страница: 7 / 10

©JRI 7
+
T° OK (voyant vert)
s’allume pendant 10’’.
+
Témoin d’alarme (rouge)
s’allume pendant 10’’.
i) Measurement stop
Depending on the configuration, the SPY RF can stop recording or not. The different options are:
j) Auto control or top zone
The type of action depends on the SPY RF configuration.
TOP ZONE = Transport mode and AUTO CONTROL = Storage mode
This function enables you to customise an action of measurement check-up. You just have to press shortly on
the pushbutton.
The action is recorded and will appear on the curve when you process the data with your software Sirius.
k) Leds and pushbutton actions functioning
The green led is on 2’’ when the measurement starts and then flashes each 1’ in recording mode.
Specials functioning regarding the recorder using mode
Device set up in storage mode
Pushbutton pressing
Mode
< 5" 5’’> pressing <10’’
OFF -
The 2 leds are on and
flash at the same time.
Starting measurements
Pushbutton
Green led 2" = beginning of
measurements
-
Delayed (date & time) - -
Immediately - -
Mesure Green led 10" = auto control -
To stop your SPY RF, press between 5
and 10” on the button:
-
The 2 LEDs are on and then flash
alternatively.
-
The screen goes off, Halt goes on.