JRG 9800.002, Инструкция по эксплуатации

Страница: 59 / 91

Operation Operating instructions
52
10.3 Switching on the system
Possible damage to the system!

Only turn the main switch on the control panel if the Production rotary switch is in the
Stop position.

On the control panel, turn the Production rotary
switch to the Stop position.

On the control panel, turn the main switch to
the I = ON position.
The power supply is turned on.
The display on the PLC (1) shows the following
message:
Selecting the operating mode
 On the control panel, turn the ECA rotary switch
to the Anolyte & Catholyte position and, after
the production values have levelled off, adjust
the flow rate to 40 L / h (see details on this
procedure below).
Anolyte and Catholyte are produced at a rate of
20 L / h.
or

Turn the ECA rotary switch to the Anolyte
neutral position and, after the production values
have levelled off, adjust the flow rate to 30 L / h.
Only Anolyte neutral is produced.
Sterisol
v1.0
Anolyte Error
Pumpe1
Nx 1