JRC JSS-2150 - Скачать руководство пользователя страница 128

Страница: 128 / 248

Operation

4-62

Message

Buttons

Description

Formatting the USB memory.
Please wait.

-----

USB memory is being formatted.
Wait for a while.

Now printing.
Please wait.

-----

It is printing.
Wait for a while.

Now reading data.
Please wait.

-----

Information on the file and the folder
is being read. Wait for a while.

Now processing NBDP settings.
Please wait.

-----

The NBDP setting information is now
being read or saved. Wait for a while.

Now saving data.
Please wait.

-----

It is saving a file. Wait for a while.

Really quit without saving?

Yes/ No

Is it OK to quit without saving?
Yes: Quits

immediately

No:

Returns to the editor.

Replace the string?

Yes/ No

Continue to replace the strings
specified?
Yes: Replacing.
No:

Cancels this operation.

String not found.

The data terminal cannot find the
string searching.

The USB drive is installed and ready to use.

Recognized the USB memory.

The USB memory can now be safely
removed from the DTE.

Unmounting the USB drive was
completed.

The USB memory format complete.

The format of USB memory was
completed.

There are no data to be restored.

There are no data to be restored and
Undo is invalid.

To stop the USB drive, choose Yes. After
the USB drive is stopped, the USB drive
can be safely removed.

Yes/ No

Select Yes when you unmount the
USB drive. After unmounting, USB
memory can be removed.

Waiting for the tuner answer…

-----

Now waiting for the answer from the
antenna tuner. Just a moment,
please.

Warning
The USB memory was removed without
unmounting that drive.

Removing the USB memory without
unmounting may cause the
malfunction of the USB memory.

Содержание JSS-2150 -

























































































































































































































































Результаты поиска

Содержание JSS-2150 -

Отзывы:

Бренды по названию

Популярные бренды

JRC JSS-2150 -, Инструкция по эксплуатации

Результаты поиска

Содержание JSS-2150 -

Отзывы:

Бренды по названию

Популярные бренды