JRC JSS-2150 - Скачать руководство пользователя страница 127

Страница: 127 / 248

Operation

4-61

Message

Buttons

Description

Error
The file name extension is allowed only
“DB”.

Input “DB” as the correct extension.

Error
The file name extension is allowed only
“TLX”.

Input “TLX” as the correct extension.

Error
The file name is wrong.

The specified file is not found, or
the file name to be copied is wrong.

Error
The file saving failed.
There is not enough room on the DTE drive.

No file can be saved because the
data terminal has no sufficient
vacant memory.

Error
The keyboard is disconnected.

-----

The keyboard is disconnected and no
control for the data terminal is
available now.

Error
The keyboard is not ready.

-----

Malfunction is detected at the
keyboard I/F and the keyboard is no
longer available now.

Error
The memory is already full.
So you cannot make a new file.

The number of files exceeded
maximum value (100), so a new file
cannot be made.

Error
The printer is not ready.
Check the paper and online status.

The printer cannot be used. Confirm
that paper is put on or that it is
online.

Error
The same file name already exists.

This file name already exists, and is
no longer available now.

Error
The station ID is not present.

SELCAL number (ID) is not
registered in the specified radio
station.

Error
There is a possibility of the USB IC failure.
All USB functions are disabled.

Detected the USB IC failure. And now
out of work here.

Error
There is not enough room on the DTE main
drive. Delete some files, or change the
folder.

The data terminal has no sufficient
vacant memory. Delete files or
change the folder adequately.

Error
There is not enough room on the USB drive.
Delete some files, or change the folder.

The USB memory has no sufficient
vacant area. Delete files or change
the folder adequately.

Error
Two or more channels are needed.

Error
Tx/Rx frequency is not present.

The frequency is not registered in the
specified radio station.

Содержание JSS-2150 -

























































































































































































































































Результаты поиска

Содержание JSS-2150 -

Отзывы:

Похожие инструкции для JSS-2150 -

Бренды по названию

Популярные бренды

JRC JSS-2150 -, Инструкция по эксплуатации

Результаты поиска

Содержание JSS-2150 -

Отзывы:

Похожие инструкции для JSS-2150 -

Бренды по названию

Популярные бренды