JRC JMA-7110-6XA, Инструкция по эксплуатации

Страница: 304 / 572

5 － 30
JMA-7100 Instruction Manual
>
5.OPERATION OF TARGET TRACKING AND AIS
>
5.3 AIS OPERATION
5.3.5.2 Displaying AIS Target Information [TGT DATA]
Procedures
1) Put the cursor on the AIS target of which information is to be
displayed , and press the [TGT DATA] key.
The information of the selected AIS target will be displayed.
5.3.5.3 Canceling AIS Target Information Display (CNCL Data)
Procedures
1) Put the cursor on the activated AIS target of which information
display is to be cancelled, and right-click.
The setting items for cursor modes will be displayed.
2)
Left-click .
The information display of the selected AIS target will be cleared.
5.3.5.4 Selecting Detail / Simple Mode for AIS Target Information Display
Procedures
1) Left-click the or button in the Digital Information located
at the center right of the display.
The detail or simple mode display for AIS target information will be selected.
5.3.5.5 Message
Received AIS messages can be displayed.
Up to 10 messages of addressed message and up to 10 messages of broadcast message can be
displayed.
If the number of messages exceeds 10, the oldest received messages are sequentially deleted.
7 Engaged in Fishing
8 Under Way Sailing
9 Reserved
10 Reserved
11-14 Reserved
15 Not Defined
i
When the numeric data of a target is displayed but the mark
is not on the radar display, the target is outside the
display.
AIS12
6. CNCL Data
□ ＿