JRC JMA-7110-6XA Скачать руководство пользователя страница 263

Страница: 263 / 572

JMA-7100 Instruction Manual

4.MEASUREMENT OF RANGE AND BEARING

4.1 USE OF NAVIGATION TOOLS

－

selected

is selected

The setting cannot be changed.

[9]

Operation Area

If All is selected for Section [2] "Operation Mode", this function sets an area for
displaying parallel index lines.

[10]

Display for Individual Line

Determines whether to turn on / off the parallel index line display of a selected
number.

: Displayed with true bearing (with North as
reference).

: Displayed with the heading line as reference.

: Displayed with a specified line as reference.

Line1, Line3, Line5 and
Line7 correspond to
Group1, Group2, Group3
and Group4, respectively.

:Parallel index lines are displayed only on one side.

:Parallel index lines are displayed on both sides.

On :The line of the selected number is displayed.

Off :The line of the selected number is not displayed.

is selected for Section [2] "Operation Mode", the

line near the own ship is

is selected

for Section [2] "Operation Mode",
Line1, Line3, Line5 and Line7
correspond to Group1, Group2,
Group3 and Group4, respectively.

Track

True

Index Line1

Line8

Line1
Line3
Line5
Line7

Group1
Group2
Group3
Group4

⇔
⇔
⇔
⇔

Equiangular

One Side

Both Side

All

Index Line1

Line1
Line3
Line5
Line7

Group1
Group2
Group3
Group4

⇔
⇔
⇔
⇔

Track

Equiangular

Содержание JMA-7110-6XA





























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JMA-7110-6XA

Отзывы:

JRC JMA-7110-6XA, Инструкция по эксплуатации, Страница: 263 / 572

Результаты поиска

Содержание JMA-7110-6XA

Отзывы: