JRC JMA-7110-6XA, Инструкция по эксплуатации

Страница: 139 / 572

JMA-7100 Instruction Manual
>
3.BASIC OPERATION
>
3.3 OPERATION PROCEDURES
3
－
19
3
3.3.4.3 Increasing or decreasing a numeric value
Procedures
1) On the numeric value input screen, sequentially left-click the
software button
or located on the radar screen, and
enter a desired numeric value.
For example, when adjusting 123.0 ° to 123.4 ° for a bearing value, sequentially left-click the
software number keys as shown below.
→ → →
2) Make sure that the entered value is correct, and left-click the
button.
The set value is reflected to the operating state.
3) To stop entering a value, right-click the button.
Alternatively, left-click the button.
The numeric value input screen will close without reflecting the set value to the operating
state.
3.3.4.4 Latitude/longitude input screen
＋
－
＋ ＋ ＋ ＋
ENT
ENT
CLR
Entered latitude /
longitude
+ button (north latitude /
east longitude )
ENT button CLR button
- button (south latitude /
west longitude)
Numeric button