JRC JHS-770S -, Инструкция по эксплуатации

Страница: 107 / 162

Operation
4-63
4.7.4 Intercom
If multiple controllers (NCM-1770) are connected, the intercom is available between two of them.
(1) Calling another controller
■
Procedure
■
1
1
1
.
.
.
Lift the handset from the cradle, and
press
FUNC
Î
5
.
¾ The controller list will be displayed.
¾ The example at right shows that the
following controllers are connected.
- Address 1: Station1
- Address 2: Calling controller
- Address 3: Station3
- Address 4: Station4
(Address 5 controller is not connected.)
2
2
2
.
.
.
Select a recipient with the jog dial and
press ENT.
¾ The screen at right will be displayed and
the intercom call will start.
¾ To cancel the calling, press the CANCEL
key or hang up the handset while calling.
- If the handset of the recipient has been
left in the off-hook condition, the call
will not start, and the screen shown at
right will be displayed.
Then press ENT to return to the step 1.
- If not answered within 30 seconds, the
screen shown at right will be displayed.
Then press ENT to return to the step 1.
3
3
3
.
.
.
After answered the phone, the screen
shown at right will be displayed and
enabled to start the communication.
¾ Press PTT key to talk.
¾ To finish the intercom, place the handset
back on hook.
Intercom mode
State: Time out
[ OK ]
6.3)Intercom
1.Station1
2.(Own station)
3.Station3
4.Station4
5.(N/A)
0.Back
INT
COM
Intercom mode
State: Calling
Intercom mode
State: Connected
Note
Intercom mode
State: Busy
[ OK ]