JRC JHS-32B, Инструкция по эксплуатации

Страница: 56 / 152

48
OPERA
TION
4.1.3 Transmitting
Originate transmission on CH16, and switch to other channels later.
OPERATION
Press
OPE
.
MASTER appears for OPE in the CH16 Status
Display.
TIP
• When no remote controller is connected,
pressing
OPE
is not necessary because
MASTER automatically appears for OPE.
• A controller which does not have priority can be
used only when no other controller is in use
[OPE: OFF], by just pressing the
OPE
key.
When using the controller which has priority,
pick up the handset or press
OPE
to make a
call.
Pick up the handset.
Press PTT to transmit a request to
change to another channel.
As long as PTT is being pressed, TX appears at
OUTPUT on the display.
TIP
Press
25/1W
to change the transmission power.
ITU
CH
16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12
°
34’ W: 123
°
45’
U
4.1 Basic Communication (Telephone Mode)
JHS-32B
MARINE VHF RADIOTELEPHONE
ITU
CH
16
MODE: SIMP TEL OUTPUT: 25W TX
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12
°
34’ W: 123
°
45’
U
Before transmitting, check that the channel is not in use. Try to make
communication time as brief as possible. Otherwise, you may impede the
communication of other stations.
CAUTION