manualshive.com logo in svg

JRC JHS-32B, Инструкция по эксплуатации

Поделиться
Скачать
JRC JHS-32B Скачать руководство пользователя страница 123

1

2

3

4

5

6

7

8

9

10

115

MAINTENANCE AND INSPECTION

5.1 Maintenance and Inspection

Procedure

Check that antenna and connectors are secure.

Pick up the handset and turn the SQL control
fully counterclockwise. Check for noise from the
speaker. Check whether noise is suppressed by
turning the SQL control clockwise.

Check that the voice level and noise level are
not abnormally loud or soft.

Press PTT and check that the unit transmits
immediately and that TX is displayed.

Check that normal conversation is possible.

5.1

MAINTENANCE AND INSPECTION

The performance and lifetime of the JHS-32B depend on careful maintenance. This chapter
describes maintenance and inspection, self test, and outline of adjustment.

Maintenance and Inspection

5.1.1

General Maintenance and Inspection

In order to operate the unit under optimum conditions, it is vital not only that regular inspections be

performed, but also that an accurate record of inspections be kept. Inspections enable problems to be

identified before they become major malfunctions.

The following inspections should be made regularly.

Inspection sequence

Inspected item

1

Antenna system

2

SQL operation

3

Receiver performance checked by
speaker output

4

Handset PTT switch

5

Transmission and reception checked
by performing radio communication.

5.1.2

Inspection of the Antenna System

The error message 

ANTENNA FAULT

 appears when the antenna system (including connectors and

cables) is defective. Check antenna and connectors. When the error message 

ANTENNA FAULT

appears, the transmission power (antenna power) is automatically reduced to 1w to protect the unit.

Содержание JHS-32B

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды