Name
Description
Action
DistanceWarning
The distance to the selected guiding
line is too large. This error can occur
if the wrong guiding line (wrong river
for example) is selected in the chart
system. Also after reboot of the track
control system, a default guiding line
is selected that is not close enough
to the current position. Or the desired
offset from the guiding line is too
large.
•
Track control system can not be
switched on.
•
If track control system is active,
acknowledge alarm by switching to
manual steering.
Note There is no other
way to acknowledge the
alarm.
Note Track control
system can not be
switched on until problem
is fixed.
•
Select a closer guiding line.
•
Navigate the ship closer to the
selected guiding line by manual
steering.
•
Wait until state of "Track" led light
returns to green color.
•
Switch on track control system.
Table 2: Alarms
4.2 Warnings
Warnings alert about states of the track control system that do not require an immediate action. However, check the
cause for the warning and switch to manual steering if required. Warnings are signaled by a blinking yellow symbol in
the top left corner of the touchscreen interface. By pressing the yellow symbol, more information will be displayed in
the bottom area of the screen. If there is more than one active warning, the warning text in the bottom area will switch
between the
different
warnings.
To acknowledge a warning, press and hold the warning symbol on the touchscreen. After the warning has been
acknowledged, the warning symbol stops blinking and changes into the following symbol.
17 | System Warnings and Errors