manualshive.com logo in svg

JR XF631, Быстрый старт

Поделиться
Скачать
JR XF631 Скачать руководство пользователя страница 26

27

XF631 MANUAL • CHAPTER 7: Functions (Function Mode)

CHAPTER 7

:

Functions (Function Mode)

continued

The amount of servo travel is adjustable for each
direction for each of the 6 channels individually. The
adjustment range is from 0% to 150%. Travel
adjustment is factory set at 100% for all channels.
The travel adjustment value displayed on the screen

depends on the position of the stick or switch (e.g.,
flap switch, gear switch). This function is useful either
to maximize control surface travel or to reduce travel
to eliminate servo binding without the need for
mechanical adjustment.

1. Turn on the transmitter.
2. Press the 

Scroll

and 

Increase

buttons up 

simultaneously to enter the Function Mode.

3. Press the 

Scroll

button until “TRV ADJ.” appears on

the screen.

4. Press the 

Channel

button until the desired

channel appears on the screen.

5. Move the selected channel stick or switch in the

direction that you want to adjust the travel. 

Press the 

Increase

or 

Decrease

button to achieve 

the desired travel. Move the stick in the 
opposite direction to adjust the travel in the 
opposite direction.

6. The same may be done for all channels.
7. Press the 

Scroll

button to access the Servo

Reverse function.

8. To exit, press the 

Scroll

and 

Increase

buttons 

up simultaneously.

Accessing the Travel Adjustment Function

TRAVEL ADJUSTMENT

• 

Function Mode

7.4

CHANNEL

SCROLL

INCREASE

DECREASE

ENTER

DIGITAL TRIM EQUIPPED 6 CHANNEL
MULTI-DATA COMPUTER DISPLAY SYSTEM

Press the Scroll button

until “TRV ADJ.” appears

on the screen.

Press the Channel

button until the desired

channel appears on 

the screen.

Press the Increase or 

Decrease button to adjust

the travel adjustment value.

1

THR: THROTTLE

2

AIL: AILERON

3

ELE: ELEVATOR

4

RUD: RUDDER

5

GER: LANDING GEAR

6

FLP: FLAP (AUX 1)

THR

+I00

%

TRV ADJ.

CHANNEL

SERVO OPERATING DIRECTION

INDICATES THE TRAVEL
ADJUSTMENT FUNCTION

TRAVEL ADJUSTMENT VALUE

Содержание XF631




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды