17
XF631 MANUAL • CHAPTER 5: Input Mode and Functions
When the power switch is turned on, the
screen will read as shown here in the
diagram. This screen is referred to as the
normal display.
CHAPTER 5
:
Input Mode and Functions
NORMAL DISPLAY
5.1
The Direct Trim function of the XF631 can be
accessed through the use of any of the 4 digital trims
levers (throttle, aileron, elevator, or rudder).
When a trim input is given, the screen will
automatically change to show the trim value for
that particular channel. Once the trim adjustment
has been made, the screen will automatically return
to the previous screen setting after 2-3 seconds. The
maximum trim value for each channel is +/- 40 in
increments of 2.
DIRECT TRIM ACCESS DISPLAY
5.2
The XF631 features two types of programming paths.
System mode includes programming functions that
are initially adjusted when the model is first set up,
like selecting wing type or the model, and is seldom
accessed after the initial setup. System modes
include:
MODEL RESET
MODEL SELECT
WING TYPE MIXING
V-TAIL MIXING
MODEL NAME
Function mode includes programming that is more
frequently changed, sometimes at the flying field.
Function Modes include:
SERVO REVERSING
DUAL RATES
SUB-TRIM
TRAVEL ADJUST
MODE TYPES
5.3
THROTTLE CUT
5.4
Your XF631 incorporates a special
Throttle Cut
button
located on the upper right face of the transmitter.
This feature is designed to immediately override any
current throttle/trim position and will immediately
return the throttle servo to the full low position. This
feature will allow the engine to be automatically
stopped in case of emergency, or in the event of a
crash. When adjusting your throttle linkage, please
check to ensure that when the
Throttle Cut
button is
pushed, the throttle servo will move the carburetor
barrel to the full closed position.
Note:
In some cases it will be necessary to
adjust the engines barrel stop screw so that the
carburetor can be fully closed. Please refer to
your engine instructions for more detail.
MDI
10.4
V
MODEL NAME
BATTERY VOLTAGE
AIL
- 2
INDICATES CHANNEL
INDICATES CURRENT
TRIM VALUE (+ OR --)
