manualshive.com logo in svg

JR XF631, Быстрый старт

Поделиться
Скачать
JR XF631 Скачать руководство пользователя страница 25

26

XF631 MANUAL • CHAPTER 7: Functions (Function Mode)

CHAPTER 7

:

Functions (Function Mode)

continued

Accessing the Sub-Trim Function

Sub-trim is an electronic trim that is available for
each of the 6 channels. Sub-trim is particularly useful
as it allows the digital trim levers to be returned to
their neutral positions by adjusting /changing the
servo’s neutral position electronically, without the
need to mechanically adjust the specific control
linkage. This allows the same digital trim lever
settings between the two models you can control
with this radio system. Sub-trim can also allow
additional trim travel when digital trims do not
provide enough movement.

Note:

It is recommended to use as little sub-trim

as possible for adjustment. If more that 20–30
points are required, is it suggested that a
mechanical linkage adjustment be performed.

Note:

Prior to making final subtrim adjustments,

please check to make sure that the digital trim
values for aileron, elevator, and rudder are set to
the neutral position. Throttle trim value should
be set to the -40 position.

1. Turn on the transmitter.
2. Press the 

Scroll

and 

Increase

buttons up

simultaneously to enter the Function mode.

3. Press the 

Scroll

button until “SB-TRIM” appears on

the screen.

4. Press the 

Channel

button until the desired

channel appears on the screen.

5. Press the 

Increase

or 

Decrease

button to establish

the desired amount of sub-trim.

6. Press the 

Scroll

button to access the travel

adjustment function.

7. To exit, press the 

Scroll

and 

Increase

buttons up

simultaneously.

SUB-TRIM

• 

Function Mode

7.3

CHANNEL

SCROLL

INCREASE

DECREASE

ENTER

DIGITAL TRIM EQUIPPED 6 CHANNEL
MULTI-DATA COMPUTER DISPLAY SYSTEM

Press the Scroll button

until “SB-TRIM” appears

on the screen.

Press the Channel

button until the desired

channel appears on 

the screen.

Press the Increase or

Decrease button to adjust

the sub-trim value.

1

THR: THROTTLE

2

AIL: AILERON

3

ELE: ELEVATOR

4

RUD: RUDDER

5

GER: LANDING GEAR

6

FLP: FLAP (AUX 1)

THR

0

SB-TRIM

CHANNEL

INDICATES
SUB-TRIM FUNCTION

SUB-TRIM VALUE (±125)

Содержание XF631




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды