17
1. In the Function List screen use the roller to highlight 18.
THRO CURV and press the roller to access the all servos
hold screen. Press YES or NO to access the Throttle Curve
screen.
2. If you wish to have different throttle curves selected via
a switch or flight mode, rotate the roller to highlight SW
SEL and press the roller. Rotate the roller to highlight the
desired switch or flight mode and press the roller. To switch
between throttle curves on the throttle curve screen once
selected, move the selected switch to the desired position.
3. Rotate the roller to highlight the desired point that you wish
to change (L, 1 or H) then press the roller to access that
point.
4. Rotate the roller to adjust to throttle curve at the selected
point.
5. To add additional points in the curve, move the throttle stick
to the area desired until the STOR option appears on the
bottom left side of the screen. Press the bottom button on
the left to store a point at this location. Adjust the value as
described in the above steps.
Step 15. Programming Throttle Curves
