JR Ergo CCPM, Руководство по сборке

Страница: 72 / 84

4-8
F LYBAR INSTA L L AT I O N
4-9
F LYBAR PADDLE AT TA C H M E N T
2 4
3mm Lock Nut
........2 pcs
4x4mm Set Screw
........2 pcs
Flybar Bushings
* Be sure to insert Flybar Bushings into
the Seesaw Shaft before inserting Flybar.
Check to make sure the two Flybar
Control Arms are parallel to the
center line of the Flybar.
Note: Center the Flybar in the Seesaw Shaft before securing the two Flybar Control Arms.
Thread each Flybar Paddle onto the Flybar until the
threaded tip of the Flybar protrudes approximately 4mm.
Adjust each Flybar Paddle so they are parallel to the
Flybar Control Arms and to each other. Secure to the
Flybar using two 3mm lock nuts.
Note proper direction of each Flybar Paddle
(short portion forward, clockwise rotation).
*Flybar Bushings (2 pcs)
Use Threadlock
Seesaw Shaft
Flybar Control Arm (2 pcs)
4x4mm Set Screw
(2 pcs)
Flybar
Flybar Centering
Center Line
3mm Lock Nut (2 pcs)
4mm
Flybar Paddle (2 pcs)
Use Blue Threadlock
........2 pcs
Flybar Control Arm
....2 pcs