JR Ergo CCPM, Руководство по сборке

Страница: 3 / 84

I N T R O D U C T I O N
Congratulations on your purchase of the JR Ergo helicopter kit.
This kit has been both engineered and manufactured by JR with help from some of
Japan’s top R/C helicopter engineers now employed by JR.
As you may well know, for years the name JR has been synonymous with state-of-
the-art, high quality radio control systems known the world over for their
exceptional reliability and engineering.
JR now brings this reputation and knowledge into the helicopter market with the
development of the Ergo and the organization of the JR heli division. Years in the
making, the Ergo’s superior quality and exceptional parts fit and finish create a new
standard of quality that was previously unavailable.
JR C C P M
To take the Ergo design to the next level, JR’s designers turned to CCPM
(Cyclic/Collective Pitch Mixing). CCPM is a unique control system that mounts
3 servos below the swashplate with short, straight linkages directly to the
swashplate at 120 degree intervals. With CCPM, complex collective and cyclic
mixing is accomplished electronically, rather than mechanically. As a result, many
parts are eliminated, along with excessive control system play, not to mention
quicker building and lower maintenance.
What’s more, you get more servo power from CCPM. That’s because instead of one
servo moving the collective, you now have three. Instead of one servo moving the
cyclic, you have two.
Before you begin the assembly of your Ergo CCPM, we suggest that you first
review the entire instruction manual to become familiar with the assembly
sequences and parts layout.
Wa rn i n g
The radio controlled model helicopter contained in this kit is not a toy, but a
sophisticated piece of equipment. This product is not recommended for use by
children. Radio controlled models such as this are capable of causing both
property damage and/or bodily harm to both the operator/assembler and/or
spectator if not properly assembled and operated. Horizon Hobby Distributors
assumes no liability for damage that could occur from the assembly and/or
use/misuse of this product.
AMA Inform a t i o n
We strongly encourage all prospective and current R/C aircraft pilots to join the
Academy of Model Aeronautics. The AMA is a non-profit organization that provides
services to model aircraft pilots. As an AMA member you will receive a monthly
magazine entitled Model Aviation, as well as a liability insurance plan to cover
against possible accident or injury. All AMA charter aircraft clubs require
individuals to hold a current AMA sporting license prior to operation of their
models. For further information, you can contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
P re-Assembly Infor m a t i o n
When first opening your Ergo kit, you will notice that all of the parts are packaged
and numbered to coordinate with the assembly step numbers of this instruction
manual.
All small hardware (nuts, bolts, washers, etc.) for each step are separated and
packaged separately within the main parts bags. When beginning a section, you will
need to open only the bag with the corresponding number to the section you are
about to start. It is suggested that you place all of the hardware in an open
container (e.g., coffee can) during assembly so as not to lose any of the small
parts. It may also be helpful to familiarize yourself with the various sizes of screws,
bolts, nuts, etc., as illustrated in the appropriate assembly section before you begin
assembly. In most cases, at the end of each assembly section there should be no
parts remaining.
Great care has been taken in filling the bags with the correct quantity of parts and
hardware for each section. However, occasionally mistakes do happen. In the event
that you find a parts shortage or are in need of technical assistance, please contact
your local JR heli division parts dealer, or contact the Horizon Service Center
directly.
Horizon Service Center
4105 Fieldstone Road
Champaign, IL 61822
(217) 355-9511 (9am to 5pm CST)
3